Digital Touchscreen Remote

The DR6 is a fully customizable touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired. Ability to use custom background images and logos in full-color on the 7-inch LCD display.

Screw the included wall-mount bracket over U.S. (or international) electrical boxes, or flush-mount the DR6 with the bracket, and cut a 2” (5 cm) square hole in the wall to accommodate the cable.

Optional, on-screen User Access logins secure management pages from public or staff use, and a programmable ambient light sensor automatically dims the backlight. The Control Page Designer in Halogen allows the user to create one set of pages and use them in a web control design, DR6 display or both.

  • Fully customizable touchscreen controller
  • Electrical box or wall flush-mount options
  • Supports multiple pages or tabs and any set of levels, toggles, selectors and/or commands
  • Drag, drop and resize controls as desired
  • RANE RPI (Remote Power Injector - not included) required for use with HAL3s and legacy HAL multiprocessors
Technical Specifications
Parameter Specification Limit Conditions / Comments
Size 3.38" x 6" 8.6 x 15.5cm
Resolution 480 x 800 pixels
Color Depth 16-bit 131,071 colours
Ambient Light Sensitivity Software configurable Adjust the sensitivity to ambient light changes
Touch Screen
Size 3.42" x 6.10" 8.7 x 15.5cm
Type Resistive
Included Wall Plate Size 4.41"H x 7.7"W 11.2 x 19.6cm
Included Mounting Screws #6-32x¼" Torx T10 (qty 2) Secures DR6 to Wall Plate or DS1 desk stand
Included Wall Screws #6-20x1-¼" (qty 4) Drywall / cement anchors included
Included Electrical Box Screws #6-32x7/8" (qty 4) Used to mount Wall Plate to an electrical box or RB1
Data Input Port To the DR6 RJ-45 connector
Data Output Port Resistive RJ-45 connector
Power 24 VDC @ 550mA max
HAL to RPI to DR6 Distance 100 meters / 325 feet total max Shielded CAT5e cable or better
Power Requirement 100 to 240V AC 50/60Hz, 18W max
Wiring Class 2 All RJ-45 connectors
Ambient Room Temperature 40 °C (104 °F) Maximum external loading
RPI Unit: Size 1.78” H x 6.9” W x 2.79” D 4.6 x 17.6 x 7cm
Weight 14.1 oz 400g
Conformity CE, FCC, CCSAUS
Size 5.0” H x 7.7” W x 0.76” D 12.6 x 19.6 x 1.9cm
Weight 1 lb 455g
Shipping: Weight (DR6 with RPI) 3 lb 3oz 1.47g
Size 2.2”H x 12.3”W x 10.3”D 5.6 x 31.2 x 26.2cm
Size 4.5” H x 7.6” W x 4.6” D 11.4 x 19.3 x 11.7cm
Weight 1 lb 1oz 480g
DS1 Shipping: Weight 1 lb 5oz 600g
Size 5.4"H x 8.1"W x 6.1"D 13.7 x 20.5 x 15.5cm
Size 5.2” H x 19” W x .4” D 13.2 x 48.3 x 1cm
Speaker Mounting Bolt Circle Diameter 120mm (4.7”) ±0.05” EIA 4” loudspeaker “standard”
Mechanically compatible speakers according to their data sheets 1. Atlas FC-104 (tested and known to fit)
2. Lowell JR410 (untested but holes are properly placed)
3. Electro-Voice 205 (untested but holes are properly placed)
Weight 1 lb 6 oz 613g
RB2 Shipping: Weight 2 lb 4 oz 1020g
Size 1.6” H x 21.5” W x 7.9” D 4 x 55 x 20cm
  • DR6
  • Wall-Mount Bracket
  • User Guide
  • Safety & Warranty Manual